We – EPG Group the most significant Chain and agricultural gearbox manufacturing facility in China with 5 various branches. For a lot more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
we have obtained the have faith in of purchasers globally. a specialised supplier of a complete range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….We It has set up stable cooperation with a lot of nicely identified universities and institutes in china such as, Zhejiang University, Jilin College, Technological committee of nationwide chain travel common, Institute of countrywide chain travel, Zhejiang application engineering material institute, Huhan substance security institute and it cooperated to identified China Initial Car chain institute with National chain generate institute.appear forward to the chance to serve you and hope to insert you to our expanding family members of content customers. ISO 9001:2000 & AS 9100B certified custom made manufacturer of roller chains. Specs of roller chains consist of .1475 in. to .3750 in. pitch, 5.9 in. to 35.4 in. duration, one hundred eighty lbs. to 1529 lbs. tensile load ability & .035 lbs. to .276 lbs. weight/ft. 1. Purposes of SINOMAC Vulcanization Autoclave
Rubber vulcanization is a chemical process at a given strain, temperature and time for changing natural rubber into more sturdy materia EPT by the addition of sulfur. These additives modify the polymer by forming cross-links (bridges) amongst specific polymer chains. Vulcanized materia EPT are considerably less sticky and have exceptional mechanical properties. And vulcanization autoclave is utilised broadly for this chemical approach. The principal items are galoshes, rubber tubes, cable, rubber roller, rubber ball, and many others.
two.  Leading Placement in the Sector
In get to get high-top quality rubber rolls, it is quite required to directly vulcanize the rubber rol EPT with steel supports inside of. This modified treatment is processed in SINOMAC rubber vulcanization autoclave. Inside the autoclave, the stress, temperature and time can be controlled efficiently without having the help of moulds. In this area, SINOMAC has been the leader, as we have accrued full vulcanization knowledge and technology for many many years.
three. Â Manufacture StHangZhourd
SINOMAC Force vessel with quick-opening doorway, can be licensed to:
- CHINESE STHangZhouRD, GB150-2011
- AMERICAN STHangZhouRD ASME SEC VIII DIV.one with ASME Certification
- EUROPEAN STHangZhouRD PED 97/23/EC with CE Certificate.
4. The Advantages of SINOMAC T EPT Method Control Software
SINOMAC vulcanization autoclave is equipped with sophisticated T EPT control method. This program is created on foundation of investigating a lot of control systems at residence and abroad for several years. It has been very experienced and well-liked. The program has fundamental capabilities as below: login permission, sensor options, technology curve placing/contacting/conserving/printing, automated/guide functionality, true-time info checking/record/preserving/printing, areas problems monitoring, alarm, top quality investigation, report types, and so forth.
five. Types of SINOMAC Vulcanization Autoclave
5.1Â Steam Pressurizing and Heating Vulcanization Autoclave
This is a kind of direct heating and pressurizing. On the base of autoclave, we established up steam diffusion tubes, where steam goes into. On the tubes, there are loads of modest holes (Ø4mm or Ø5mm) densely organized as a normal array and tilt angle. This layout can make the steam flowing within the tubes evenly unfold into place through these near-set holes. So that we can make certain interior uniformity of temperature and pressure. The temperature uniformity can be controlled in +/- 1ºC. The method heating efficiency is large, which is really important to vulcanize these weighty rubber items with big dimension.
five.2 Electric Heating and Compressed Air Pressurizing Vulcanization Autoclave
This is a principal heating type. It is fast, power conservation and practical. For the mo EPT of rubber items needed electric heating, the vulcanization method can be carried out strictly as the preset technological innovation curve. So that person can get merchandise of higher good quality.
SINOMAC electric powered heating vulcanization autoclaves use tailor-made stainless tubular heating aspects and inlay new thermal conductivity of insulating components. The heating is fa EPT and functioning lifestyle is lengthy. All the termina EPT of wires connecting the heating factors are exterior, which can avoid the developed-in wires heat to get a fireplace. This design and style improves vastly the heating program safety. By the specific circulating fan and realistic air duct layout, the area inside of the autoclave can receive uniform temperature. At the exact same time, the strain is managed independently.
5.3Â Steam/Thermal Oil Heating and Compressed Air Pressurizing Vulcanization AutoclaveÂ
This variety of Vulcanization Autoclaves are normally employed for massive metal main rubber roller and exactly where is deficiency of electric powered electricity. In get to keep away from the difference of thermal conductivity in between metallic main and rubber, usually we use a sluggish heating and pressurizing curve. The genuine vulcanization time is considerably more time than the 1 rubber required normally. In this variety of autoclave, the debonding amongst steel main and rubber roller will not happen.
six. Insulation of SINOMAC Vulcanization Autoclave
Inside Insulation and Exterior Insulation
We use ceramic fiber as the insulation content. The heat transfer coefficient is quite reduced to make the heat loss to a minimal. The masking board of ceramic fiber is stainless steel. It is corrosion resistant and appears wonderful. Internal insulation layout can get a lower energy consumption, whilst external insulation design gets a substantial a single, but a greater temperature uniformity.
seven. Sizzling Air Circulating Technique of SINOMAC Vulcanization Autoclave
We use modified centrifugal impellers, which can create large air movement and large air strain. And we adopt a dynamic and mechanical sealing design and style. The dynamic and static ring sealing content is silicon carbide-graphite.
The style of air duct framework is a U variety with movement guiding device, which can guarantee the adequacy of very hot air circulation. The pressured convection rate inside the autoclave can achieve more than ninety%. By this layout, the technique can receive a continual and uniform temperature increasing charge.
8. SINOMAC World-wide Turnkey Tasks
With the knowledge of manufacture and provider for 15 many years, our skilled team are capable to offer the international turnkey project, such as a specialist coaching. SINOMAC autoclaves can be manufactured as ASEM, PED, EPT stHangZhourds, as properly as our Chinese stHangZhourd.
9. Autoclave Specification
Â
MODELÂ SN-LHGR28Â VULCANIZATIONÂ AUTOCLAVE-TECHNICALÂ PARAMETER | |||
No. | Description | Device | Specifications and Parameters |
1 | Effective Working Diameter | mm | 2800 |
2 | Effective Working Length | mm | 8000 |
3 | Autoclave Track Distance | mm | 950 |
four | Design Pressure | MPa | one |
5 | Max. Working Pressure | MPa | .eight |
6 | Safety Valve Exhaust | MPa | .eighty five |
seven | Design Temperature | ºC | 180 |
eight | Max. Working Temperature | ºC | 160 |
9 | Temperature Uniformity at Steady State | ºC | ±2 |
ten | Openning Door Mode | — | Hydraulic |
eleven | Working Medium | — | Compressed Air |
twelve | Heating Mode | — | Electric (Convection+Radiation) |
thirteen | Heating Power | KW | 252 |
fourteen | Quantity of Circulating Fan Motor | Established | 1 |
fifteen | Quantity of Circulating Fan Motor | KW | 22 |
16 | Thermocouple Type | — | Type K or J |
seventeen | Vaccum Lines | Piece | — |
eighteen | Quantity of Vaccum Pressure Transducer | Piece | — |
19 | StHangZhourd Control Mode | — | PLC+Computer |
20 | Control Software | — |  Thermal Processing Control (TPC) |
21 | Insulation Type | — | Interior |
22 | Insulation Material | — | Ceramic Fiber |
23 | Insulation Thickness | mm | eighty |
24 | Insulation Sheet Material | — | Stainless Steel or Aluminized Steel |
25 | Working Environment Temperature | ºC | Min. -20ºC, ,Max. +45ºC |
26 | Working Environment Humidity | — | <60% |
27 | Power Supply | — | 220/380VAC, 3P+N+PE, 50/60Hz |
28 | Fat | KG | 22760 |
10. Skilled Workshop
From the SINOMAC Staff, with fifteen many years of experience.
Â
The use of unique products manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our business and the detailed substitute components contained herein are not sponsored, accredited, or produced by the OEM.